Lead titanium material supplier

Introduction of Titanium Mesh

Titanium mesh is mainly used for sieving and filtering under acid and alkali environmental conditions or for gas, liquid filtering and other media separation. There are three methods: plain weave, twill weave, and dense weave. Due to the difficulty of drawing titanium wire, the current domestic drawing of relatively skilled titanium wire can be as thin as 0.1mm, with low elongation, high strength, high elasticity, and low flexibility. This greatly limits the production of high mesh titanium mesh.

Material quality: pure titanium titanium alloy
Hole type: rhombus, round, hexagon, quincunx and special-shaped holes
Sheet thickness: 0.1mm-2mm
Specification: 1*2mm 3*6 mm 4*8 mm 5*10 mm 5*12mm etc.
Flatness: The contact area between the finished product and the glass platform ≥ 96%
Surface treatment: can provide coating treatment processes such as coating ruthenium oxide and ruthenium coating
Material: TA1, TA2, GR2, GR3, R50250, titanium alloy, etc.
Material surface: 1. Black (the surface contains graphite emulsion coating) 2. Bright (no graphite emulsion coating)
In the environment of corrosion-resistant media, the high-purity titanium wire mesh forms a dense, strong adhesion and inert oxide film on the surface, which produces passivation and protects the titanium wire mesh matrix from corrosion, thereby achieving strong corrosion resistance. ; Especially in the following use environments, corrosion resistance, such as: seawater, wet chlorine, chlorite and hypochlorite solutions, nitric acid, chromate metal chloride and organic salts, etc. (for example: 60% nitric acid, pure titanium wire The corrosion rate of the net in the nitric acid solution is only 0.001mm.a-1)

INTRESTED?  Please send us your inquiry to tsm@tsm-titanium.com

Leave A Message