titanium tube

The titanium tube is light in weight, high in strength and superior in mechanical properties. It is widely used in heat exchange equipment, such as tube and tube heat exchangers, coil heat exchangers, serpentine tube heat exchangers, condensers, evaporators and transportation pipelines. Many nuclear power industries use titanium tubes as standard tubes for their units.

Basic Information:

Titanium tube are implemented according to different requirements and performance standards:ASTM B338,ASTM 861,ASTM 862

Supply standard

Grade 1,Grade 2,Grade 5,Grade 7,Grade 9,Grade 11,Grade 12,Grade 23

skills requirement

1. The allowable deviation of the outer diameter of the pipe should comply with the following table.

2. The allowable deviation of pipe wall thickness should not exceed ±12.5% of its nominal wall thickness. The allowable deviation of pipe wall thickness is not applicable to the weld of titanium welded pipe.

3. The fixed-length or multiple-length length of the pipe should be within the range of its indefinite length, and the allowable deviation of the fixed-length length is +10mm. The multiple length should also be included in the cut when the pipe is cut, and each cut should be 5mm.

Permissible deviation of the outer diameter of titanium tube(mm)
Outer diameter 3~10 >10~30 >30~50 >50~80 >80~100 >100
Allowable deviation ±0.15 ±0.30 ±0.50 ±0.65 ±0.75 ±0.85

Factory introduction

TSM Technology is a leading manufacturer of titanium seamless tubes and titanium pipe fittings in China. Our titanium tube products are exported to more than 40 countries in the world, our main markets are Europe, America, Middle East and Southeast Asia. The workshop covers an area of more than 60,000 square meters, and annually produces more than 1,200 tons of various pipes, more than 2,000 tons of titanium ingots, and more than 2,000 tons of extruded hollow billets.

titanium tube

 

If you are interested in our titanium tube, please feel free to contact us tsm@tsm-titanium.com.

Leave A Message